Repairs
Ding Epoxy Board Repair Stick from Chinook
Solarez 2oz Epoxy Ding Repair
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- No mixing necessary. UV curing assures complete hardening.
- Provides complete crosslinking
- Remarkably tough and resilient
- Contains urethanes that keep from yellowing
- Eco-freindly ZERO vapors, non-flammable.
- Comes with 60/240 grit sand pad.
Solarez 1oz Low Light Epoxy Ding Repair
Solarez 2oz Polyester Ding Repair
SOLAREZ repair putty is a mixture of clear, non-yellowing, high strength, fiber reinforced polyester resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 30 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- Proprietary formula assures that millions of fiberglass fibers are thoroughly wet-out and evenly dispersed in every dose.
- Bubble-free mixture
- Denser cross-linking and surface cure
- No residual peroxides
- UV Stable
- Comes with 60/240 grit sand pad.
Solarez 1oz Microlite Epoxy Filler Ding Repair
What is Solarez Microlite Epoxy?
It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.
UV-CURE
- (for superficial dings less than 1/4″ deep)
- Apply in the shade.
- For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
- Expose to sunlight for 3 minutes
- Peel off plastic wrap and touch-up sand.
Solarez 2oz Polyester Microlite White Filler Ding Repair
Lightweight, Sandable Filler
Formulated especially for surfboard [urethane] foam repair. For deep dings. Lightweight and easy to sand. Cures either by UV light in approx 3 minutes or by MEKP catalyst in 30 minutes.
Comes with 60/240 grit sand pad and spreader card.
Not for use on Styrofoam (EPS).
Please click the "Size guide" for the Tech Sheet.
Windsurfing Sail and Board Repairs. For professional repairs please see our repairs page: CLICK HERE