Web Store
Flying Objects Windsurfing Harness Lines (Pair)
Fixed Harness Lines
- Built tough to withstand the harshest environments
- Low stretch polyester rope maintains size and shape
- Transparent urethane tube
- Clear PVC size labels
Select options
This product has multiple variants. The options may be chosen on the product page
60% Carbon RDM Legacy XT Ezzy Windsurfing Mast
- The Ezzy Legacy skinny masts contain 60% pre-preg carbon fiber. Pre-preg is the key to achieving a superior weight-to-strength ratio. The fibers are pre-saturated to an exact resin-to-fiber ratio, then hand-wrapped around a mandrel, and then thermally cured. The lower carbon percentage makes this mast even tougher and more impact resistant than the 91% Hookipa mast. If you are particularly hard on kit this would be a good way to go for added durability.
- The Ezzy Skinny Mast gets its superior strength from the 50% extra thickness of its walls. The small diameter makes the Ezzy Skinny a dream to sail. You'll notice the improved handling right away in your jibes.
- The Ezzy Sails are widely tested on standard and reduced diameter masts, and work perfectly well, but if you are looking for the perfect blend of performance and durability for Wave, Bump and Jump or even Slalom conditions, the RDM mast system is is the way to go.
Select options
This product has multiple variants. The options may be chosen on the product page
Downhaul for Duotone North Dyneema ‘Formula’ Downhaul Rope for Power XT
This stuff is bumpy so it grips better than any other types of downhaul. It is made by Marlow Ropes.
£3.60 per metre
We will ship this is one total length. Please contact us if you would like it pre cut to particular lengths.
What length to buy if you are not sure:
- Downhaul comes as 2m as standard on all Power XT Extensions
Select options
This product has multiple variants. The options may be chosen on the product page
M6 Torx Fin Bolt A4 Stainless 40mm – 100mm
Select options
This product has multiple variants. The options may be chosen on the product page
Dakine Fixed Windsurfing Harness Lines White Pair
Dakine Fixed Windsurfing Harness Lines
- Set of two harness lines
- 8-Plait pre-stretched FSE Robline rope
- High-density polyurethane tubing
- Non-slip boom pads
Select options
This product has multiple variants. The options may be chosen on the product page
Junior Crewsaver Aplite Neoprene Summer Wetsuit Shoes
Junior Crewsaver Aplite neoprene Summer wetsuit shoes
- 2 mm neoprene construction
- Drawstring ankle adjustment
- Moulded high grip sole
Select options
This product has multiple variants. The options may be chosen on the product page
Black Witch Neoprene Wetsuit Adhesive
Black Witch is a ready to use, solvent based, contact adhesive tested and approved as the only product suitable for use as the cut end sealant for SABREX®. Black Witch also exhibits excellent adhesion to neoprene, rubber and various types of flexible plastics and is therefore suitable for fast repairs to Neoprene wet suits and other water sports equipment.
Due to its fast flash off and long open period, bonds may be made over a wide range of open times and the fast-cure time of approx. 1 to 2 hours is especially suitable for quick in-field repairs. After cure, Black Witch exhibits good flexibility and resistance against heat, weathering, ageing, moisture and UV light. – For further technical information please refer to the below Technical Data Sheet and SDS.
How to use
1.) Instructions for use with SABREX® Use Black Witch as a cut-end sealant for SABREX®. Note:- SABREX® is also known as FLCC in some markets. Black Witch should be applied to the exposed face of the bottom sheath beneath the explosive and liner. Apply with a brush or stick. It should be worked into the black foam material until the foam cells are filled and covered with a smooth shiny coating that is uniform and continuous from edge to edge. - Black Witch should be allowed to cure for approximately one to two (1-2) hours before SABREX immersion. - Once opened, the 28g tube of Black Witch should be consumed within 30 days. Note: In trials a 28g tube has proved sufficient to coat more than ten (10) SABREX® exposed cut-ends. For further information please refer to below Black Witch Technical Data Sheet Revision 3. Issued 25.02.2014 and Black Witch SDS Revision 4. Issued 22.02.2012 - If the user has any further questions relating to safety or hazards concerning SABREX, please refer to the contact details on the SABREX User Instruction (CEU-205-01195) or Product Safety Datasheet (CEU-205-01196) 2.) Instructions for Neoprene repairs etc. Step 1: Apply Black Witch with a short, stiff brush. - Apply a thin even coat of adhesive to both surfaces. Step 2: When surfaces become ‘touch dry’ (i.e. adhesive is glossy and no longer transfers to the knuckles) align the bond edges and bond under maximum pressure. If possible continue to maintain the jointed surfaces under pressure until Black Witch is cured in approximately one to two hours. Fully test all repairs prior to product use. Note: The full technical cure period is approximately three days. In case of contact with hands wash using brush soap and water.
O’Neill Superfreak Tropical 2mm Split Toe Summer Wetsuit Shoe
PLEASE NOTE THAT THESE BOOTS ARE IN US SIZING AND DO COME UP SMALL SO WE HAVE DEVISED OUR OWN ABW SIZE GUIDE AS YOU CAN SEE BELOW.
O'Neill Superfreak Tropical 2mm Split Toe Summer Wetsuit Shoe
The O'Neill boot line continues to impress and reflect the expertly designed features and attention to detail you have to come expect from O'Neill.
O'Neill Superfreak Tropical 2mm Split Toe Summer Wetsuit Shoe
The O'Neill boot line continues to impress and reflect the expertly designed features and attention to detail you have to come expect from O'Neill.
- 2mm
- Split toe
Select options
This product has multiple variants. The options may be chosen on the product page
O’Neill 2mm Epic DL Neoprene Wetsuit Gloves
The Epic 2mm Double Lined Wetsuit Gloves offer high levels of protection, with lots of stretch, and a soft Neoprene construction. The fluid foam neoprene inner gives more durability, comfort and warmth out on the water - even for the very cold days on the water.
- 2mm
- FluidFlex Neoprene
- Fluid Foam
Select options
This product has multiple variants. The options may be chosen on the product page
Radz Windsurfing Mast Extension RDM
Radz Windsurfing Mast Extension RDM
Does not come with downhaul! Please remember to add standard downhaul or formuline downhaul to your order.
Mast extension incorporating a euro pin base.
Available in RDM or SDM and in sizes - 15cm, 30cm and 45cm
Select options
This product has multiple variants. The options may be chosen on the product page
Overboard Waterproof Phone Case Large – Black
Overboard's 100% waterproof Slide Seal System™ combined with a transparent front and LENZFLEX back means you can browse, chat or snap away while your Large Phone or Phablet device is safely sealed inside the waterproof pouch.
Big enough to accommodate even the largest of SMART Phones including the iPhone Plus range, the OverBoard Waterproof Phone Case is also guaranteed submersible to 19ft / 6m, meaning you can drop it in the water without losing your rag.
Washable, hygienic and reusable with a few wipes using regular or anti-bacterial soap, the Waterproof Phone Case has safety in mind providing a protective barrier from germs getting to your phone.
- 100% waterproof phone case - Class 5: IP68
- Floats if dropped in water
- Guaranteed submersible to 19ft / 6m
- LENZFLEX back window for ultra clear photos
- Clear front for full use of phone features
- Make & take phone calls through the waterproof case
- High Frequency welded construction
- Keeps out dust, sand, dirt and water
- Made from eco-friendly TPU fabrics
- Perfect for the largest of SMART Phones
- Protects your device from bacteria
- Easy to clean after use with a few wipes
Yak Kallista PFD Buoyancy Aid – Black
YAK KALLISTA PFD
Yak has completely redesigned the classic Kallista PFD. They have called upon their dedicated in-house design team and tasked them to use their huge expertise in the PFD market to improve on an already excellent product. Each element was reviewed in turn, improved where possible, and then the parts combined, and reviewed and improved again! The result of this process is the most comfortable and secure PFD Yak has ever made at this level.
Select options
This product has multiple variants. The options may be chosen on the product page