Windsurf
K4 Slot Box Windsurfing blanking plates 100mm & 130mm – Yellow
Select options
This product has multiple variants. The options may be chosen on the product page
Prolimit SUP WING FOIL Board Bag
Specifications
The ABW measured size is the actual size of the bag from inside the black edge. Some foil boards are very thick these days so you do need lots of extra width to accommodate the board as the bag effectively shrinks as you put the board in.
If you are at all unsure about what bag will fit your board please contact us before ordering.
Code: 404.03150.020
- 5mm foam padded bag
- Silver top and bottom skins reduces overheating
- FOIL slot opening with velcro closure
- Shape follows our (5cm+10cm) formula
- Heavy-duty 600D Polyester nose and tail protection
- Adjustable shoulder strap
- Durable non-corrosive zippers
| Label Size | ABW Measured Flat |
| 183 x 73cm (6'0 x 29") | 185 x 92cm (6'1 x 36”) |
| 200 x 83cm (6'7 x 33") | 201 x 100cm (6'7 x 39”) |
| 215 x 78cm (6'11 x 31") | 205 x 89cm (6'8 x 35”) |
| 240 x 77cm (7'6 x 30") | 230 x 90cm (7'6 x 36”) |
| 245 x 81cm (7'8 x 32") | 245 x 95cm (7'8 x 37”) |
Select options
This product has multiple variants. The options may be chosen on the product page
Ezzy Zeta Windsurfing Sail – Blue – 3.7m LAST ONE!
You might remember David Ezzy’s North Zeta from the late 80’s and early 90’s. The original Zeta shocked windsurfing back then by being the first 5-batten wave sail. Fast forward a few decades and some intensive R&D, and the Ezzy Zeta rides again.
The Zeta’s constant drive and easy acceleration make the Zeta the perfect sail for onshore waveriding and bump’n’jump conditions. The Zeta’s stable profile gets going right off the beach.
In fact, the Zeta is Graham Ezzy’s sail of choice for all professional wave competitions: “When I’m competing, I have only 12 minutes in each heat to do all my jumps, wave rides, and tricks. I need a sail that planes early and flies around fast so that I can make the best use of every minute of my heat. The Zeta has constant power that drives through the lulls, currents, and chop so that I am always planing even when the conditions are tough. The luff panel allows the Zeta to de-power, making it perfect for all my tricks—like backloops, takas, and wave rides.”
This Ezzy Zeta is powerful, easy to control, and equally at home on a wave at Hookipa or screaming across your bay on a windy afternoon.
Part exchange welcome- Please call 023 9258 2614
Select options
This product has multiple variants. The options may be chosen on the product page
ION Uphaul TEC – Black
Select options
This product has multiple variants. The options may be chosen on the product page
Chinook 4 Wheel Pulley Hook Aluminium Anodised – Colours Vary
Chinook RDG Carbon Windsurfing Boom 150-200cm
Unconditional 12 Month Warranty
- Standard Pro-1 Head fits SDM or RDM
- Reduced Diameter Grip - 24.5mm, this baby is skinny!
- 2-Pin stainless steel vertical slide collars
- New 50cm tail is stiffer and creates modern, straighter bend
- New loop-n-go outhaul block for quick, centered sail position
- Built-in excess rope retention
- Harness line index markings
- Absolute boom length markings
- Monocoque custom composite body and tail-piece
- Permanent absolute length markings
- Easy adjustment collars
- Positive snap-in skinny adapter
- Specialized Bend Curve
- Range: 150-200cm
- Weight: 2.15 kg
These carbon booms come into their own in choppy or overpowered conditions - their stiffness resists arm bending, and prevents the rig from distorting and causing you problems!
Solarez 2oz Polyester Ding Repair
SOLAREZ repair putty is a mixture of clear, non-yellowing, high strength, fiber reinforced polyester resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 30 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- Proprietary formula assures that millions of fiberglass fibers are thoroughly wet-out and evenly dispersed in every dose.
- Bubble-free mixture
- Denser cross-linking and surface cure
- No residual peroxides
- UV Stable
- Comes with 60/240 grit sand pad.
Solarez 2oz Polyester Microlite White Filler Ding Repair
Lightweight, Sandable Filler
Formulated especially for surfboard [urethane] foam repair. For deep dings. Lightweight and easy to sand. Cures either by UV light in approx 3 minutes or by MEKP catalyst in 30 minutes.
Comes with 60/240 grit sand pad and spreader card.
Not for use on Styrofoam (EPS).
Please click the "Size guide" for the Tech Sheet.
Solarez 1oz Microlite Epoxy Filler Ding Repair
What is Solarez Microlite Epoxy?
It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.
UV-CURE
- (for superficial dings less than 1/4″ deep)
- Apply in the shade.
- For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
- Expose to sunlight for 3 minutes
- Peel off plastic wrap and touch-up sand.
Solarez 1oz Low Light Epoxy Ding Repair
Severne Enigma Carbon Windsurfing Freeride Boom
THE LIGHTEST, STIFFEST AND MOST DURABLE BOOM IN EXISTENCE. AVAILABLE IN WAVE, FREEMOVE AND RACE PROFILES
The custom carbon manufacture of the Enigma booms has one main objective; to produce the best stiffness to weight ratio. Unique methods have been developed to enhance the manufacture with every boom built individually with the emphasis on technology, not mass production.
ENIGMA Hardware transforms your entire rig; the ultimate combination of lightweight, stiffness, ergonomics and geometry.
Select options
This product has multiple variants. The options may be chosen on the product page
Severne Enigma Carbon Windsurfing Wave Boom
THE LIGHTEST, STIFFEST AND MOST DURABLE BOOM IN EXISTENCE. AVAILABLE IN WAVE, FREEMOVE AND RACE PROFILES
The custom carbon manufacture of the Enigma booms has one main objective; to produce the best stiffness to weight ratio. Unique methods have been developed to enhance the manufacture with every boom built individually with the emphasis on technology, not mass production.
ENIGMA Hardware transforms your entire rig; the ultimate combination of lightweight, stiffness, ergonomics and geometry.
Select options
This product has multiple variants. The options may be chosen on the product page
