Windfoil
2023/24 Ezzy Cross Foil and Freeride Windsurfing Sail – Orange
Cross
Windsurf to foil with one sail.
What is the Cross?
A high performance sail for windsurfing and windsurf foiling.
What inspired the Cross?
David Ezzy needed one sail that would satisfy his two loves, foiling and windsurfing. He took what he learned from the past 4 years of foiling and combined it with his 40 years of wave and freeriding to come up with the Cross.
How does the Cross compare to last year’s Hydra and Hydra Pro?
The Cross is much lighter weight compared to the Hydras with similar stability, speed, and handling while being much better for fin freeriding.
How does it compare to the Cheetah?
The Cross is maneuverable and light in the hands, providing a bump-n-jump freeride experience, whereras the Cheetah provides a locked-in freeride experience. For high wind freeriding, we recommend the 4.7 Cross as the next size below the 5.5 Cheetah.
How does the Cross achieve high performance for both foiling and regular windsurfing?
The Cross can be rigged flat with a shallow yet defined profile for foiling OR rigged full with a deep, forward profile for freeride and bump’n’jump. The settings are easy to see with our calibrated downhaul gauge.
Part exchange welcome- Please call 023 9258 2614
Select options
This product has multiple variants. The options may be chosen on the product page
M6 Locking Brass T Nut Set (x4 nuts)
Set of 4 Locking T-Nuts M6
Stop loosing your nuts with the Locking T-Nuts. Order a set of four and give your board the re-vamp it needs. These locking T-Nuts are for all foil boards.
How it works:
- Open your newly purchased pack of four locking T-Nuts.
- Place them in the tracks of your boards
- Mount the foil mast like you would normally, lining up the t-nuts with the bolts how you normally would.
- Carefully remove bolts and mast. Try not to nudge the t-nuts!
- Here is where the magic happens. Carefully do the grub screws up one by one.
- DO NOT OVER TIGHTEN! They only need to be done up enough to pinch the t-nut in place.
- Repeat on all T-nuts! You are all done, now you will not loose these pesky little nuts any more. And even better they will always be in the perfect place!!!
Starboard (& Fits Naish) Foil to Board Top Plate Torx Bolts 30mm and M6 T Nuts
Please note these have come to us without the top card header on the packaging.
BOARD MOUNT M6 SCREW SET – STANDARD PLATE (TORX)
Four (x4) M6 30mm Stainless Steel Torx Screws
Four (x4) M6 Stainless Steel T-nuts
For Naish boards you probably need to buy 25mm screws
CLICK HERE for M6 counter sunk screws in different lengths
2023 Starboard Supercruiser Evolution Hydrofoil with 85cm Aluminium Mast DEEP TUTTLE
SUPERCRUISER
EVOLUTION
Now available in Top Plate! Our bestseller. Takes off at low speeds, keeps you flying through foil jibes and 360s, and simply our most fun and maneuverable wind foil. For foiling with small sails and compact foil boards. Available in: Aluminium // Carbon C300* // Aluminium Top Plate Edition| FW: SuperCruiser 1700 Evolution C300 |
| TW: 330 C300 |
| Fuselage: 102 Evolution Classic |
| Mast: 85cm 87° Carbon C300 or 85cm Aluminium V5 Deep Tuttle or 82cm Aluminium V8 Top Plate |
| *Carbon version supplied with Team Bag |
Select options
This product has multiple variants. The options may be chosen on the product page
AFS F800 Super light wind carbon hydrofoil front wing
***Please note this is just for the front wing not the whole hydrofoil setup***
AFS F800 Super light wind carbon hydrofoil front wing
Get out in even lighter winds with the super light wind F800 foil !!
The F-800 foil windsurf wings have been designed to provide the maximum lift and stability in light winds. They are ideally suited to heavy riders and / or riders wanting to push the limits of windfoil navigation in light winds.
Monolithic manufacture full carbon prepreg. Made in France.
Compatible with all AFS foil windsurfing models.
SAB Hardware Kit – T-Nuts and bolts
SEVERNE WINDFOIL BOARD BAG 210×75 & 215×85
Severne Windfoil Board Bag
- Suitable for a range of foil boards - please call 023 9258 2614 for further advice.
- 600D Black and Polysak White material – Optimized weight/ strength.
- 5MM Foam protection.
- Abrasion reinforcements at fin/foil cutout areas.
- Center rail handle and center deck handle.
- Max durability zipper.
- Overlap behind zipper to protect board from scratches.
- Size indication on the tail for easy identification.
- Internal stitchings for maximum protection.
- “T-Zipper” with velcro featured on foil bags for covering boards with foil assembled, as well as, max travel protection.
Select options
This product has multiple variants. The options may be chosen on the product page
