Accessories
Ding All Epoxy Repair Kit 2+1fl oz
Ding All's Standard Epoxy Resin Ding Repair Kit works for both Epoxy and Polyester Ding repairs when UV light is NOT present and fiberglass cloth is needed.
This kit contains Ultra Clear, SS 2000 resin that is used in Epoxy surfboard construction. The resin is dual purpose, and can also repair polyester surfboards. The kit comes complete with the following materials to allow an easy method for small or medium surfboard repairs.
Epoxy Working time is approx. 30 minutes. Full cure in 6 to 8 hours at 77 degrees F.
*NOTE: Use 1/4” Layers of Filled Epoxy resin to fill larger holes or voids to avoid resin overheating.
Kit Includes:
- x1 - 2 oz. (56 ml). Ultra Clear Epoxy Resin Plus 1 oz. (28ml). Hardener - Non-Yellowing
- x1 - 15cm x 34cm Fiberglass Cloth patch
- x1 - 2 Sided Sanding Pad (1 side Smooth (120 grit) ,1 side Rough- (80 grit) For easy sanding.
- x1 - Measuring Cup Note: cup can be re-used after popping out hardened resin from previous repair
- x3 - Application/Mixing Sticks
- x1 - Cover Sheet Note: this is used to cover small dings to make super smooth finish once hardened. Just peel off.
- Easy Instructions
Dakine Cobra Half Hook Footstraps
Crewsaver Tri-Season 5 Finger Sailing Gloves
Neoprene construction to help keep you warm and dexterous even on the colder days. Complete with Amara leather reinforcement on the palm, fingers and thumb, the Tri-Season glove gives the protection and durability you need when on the water in tough conditions or for long periods of time.
FEATURES
- Neoprene and Amara construction
- Amara pull tab on wear point
- Coated Amara protection on the palm, fingers and thumb
- Amara knuckle panel for protection and durability
- Palm reinforcement for protection against rope burn
Select options
This product has multiple variants. The options may be chosen on the product page
Prolimit Easy Rig Downhaul Puller HD Metal
ClamCleat Power Grip 2
Take the pain out of pulling smaller ropes. The Clamcleat® CL262 Power Grip 2 allows you to pull over twice as hard compared to using your bare hands. Light, strong and convenient to carry in your pocket. The smoothly contoured hand grip area has been voted the most comfortable shape to fit all hand sizes.
K4 Flex US Box Rear Fin for SUP, Paddleboard or Windsurf Board
K4 Flexy US Box Rear Fin for SUP / Paddleboard or Windsurf Board
These can be used as 'twinsers' or as a single rear fin. They come complete with nylon plate and screw for US box fin systems.
"Our original fin for performance wave riding. Lots of flex for amazing grip and looseness on the wave. Raked template for control. A progressive foil for different flows between tip and base. Test winner. Will loosen up a 'stiff' board and are particularly sweet as twin fins as they eliminate that unwanted top turn spin out." - K4 Fins
Select options
This product has multiple variants. The options may be chosen on the product page
ION Amara Half Finger Glove for Watersports
Neo accessories are the key for turning your cold water days into good ones. ION's Amara Gloves ensure an improved grip and provide lightweight protection.
Product code: 48200-4140
Select options
This product has multiple variants. The options may be chosen on the product page
Severne NYCA Windsurfing Fin
NYCA FINS
NYCA is an injection-based technology utilising a specialised blend of thermoplastic polymer and carbon fibres. This blend not only offers resistance to abrasion but also the ideal rigidity for windsurfing performance.
Carbon fibre content is added to create efficient active flex patterns, similar to traditional premium production methods.
NYCA fins are lighter and more durable than traditional G10 or RTM fins, with much higher strength and impact resistance. As a result, longevity is also upgraded, whether be it for hours on the water or impacts with shallow reefs.
/ Moderate stiffness
/ Responsive
/ Increased control
/ Lightweight
The NYCA wave fin
NYCA technology wave fins are precision manufactured for responsiveness. This latest innovation not only enhances drive and control but does so without compromising acceleration and top speed. This is achieved by maintaining the tried and proven blueprint that current SEVERNE wave fins are built on. Front lateral fins Crafted for optimal acceleration and drive, the lower section of these fins prioritizes maximum speed. With a relatively pronounced rake, narrow chord, and forward profile, more lift is produced while drag is minimised. Fast and efficient. The curved yet compact tips ensure a predictable engagement and release effect. Rear lateral fins Equipped with a wider base, the rear lateral fins provide essential stability. A moderate rake and a relatively narrow chord in the top section generate substantial drive. An enhanced surfing experience.
Select options
This product has multiple variants. The options may be chosen on the product page
Ezzy Sails Windsurfing Padded Mast Bag
Ezzy Sails Windsurfing padded mast bag to protect your mast from damage and increase the ease of transport.
- 370 cm
- 400 cm
- 430 cm
- 460 cm
- 490 cm
Select options
This product has multiple variants. The options may be chosen on the product page
Goya Adjustable Harness Lines 26″-34″
Chinook In-flight Adjustable Harness Lines PAIR
The Chinook Sailing In-Flight Adjustable Harness Lines are a simple but effective design for sailors requiring on the move adjustments. Heavy duty ladder-lock, line and tubing
COMES AS A PAIR
- Pre-adjustable with one side tie off
- Infinite adjustment on tie off side
- 5" webbing adjustment
- 36" maximum length
Chinook 2 Bolt Quick Release Mast Base Plate
Chinook 2 Bolt Quick Release Mast Base Plate
- Chinook at its best, simple, tough, trustworthy and made to last
- For many this is part of the ultimate, no compromise system for when the going gets tough
- Quick release plate for all Two-Bolt "Quick Release" Mast Bases
- Includes mounting hardware
- Twin bolts for ultimate security
- Adjustable using UJ base
- Go on, get one for each board!
Severne Harness Lines Fixed – Red
Severne Harness Lines
Demand for SEVERNE harness lines has finally been satisfied. Rather than just re-badge any generic harness line, we evaluated what was required to improve on anything in the market. Durability, safety and performance were the 3 factors we identified, and have addressed each point;
DURABILITY
Stronger tubing results in less rope wear. We have developed custom extrusion with a thicker wall (2mm) and using high-denisity PU. Strong nylon webbing replaces standard poly-prop for increased UV resisitance and less wear.
SAFETY
Coloured tube hides any sign of rope wear, so the first you know of it is when the harness line snaps out at sea. We keep it clear so any signs of rope wear are clearly visible.
PERFORMANCE
Minimal swing design keeps the harness line in position.
Select options
This product has multiple variants. The options may be chosen on the product page