Accessories
MFC Freewave US Box Windsurfing Fin 23cm
MFC Freewave US Box Windsurfing Fin 2014 23cm
The Freewave US box windsurfing fin is MFC very popular range of after market fins. The fin now uses Vectran cloth which is a new material used in the Pre-preg construction of the fin. It is light, strong and has a very responsive nature relative to torsional twist.
The excellent control charateristics give the sailor confidence in maneuvers, coupled with good early planning and upwind performance makes the fin great for all freewave conditions.
MFC Forward Freewave Windsurfing Fin Power Box
FREEWAVE Forward Single Fin
MAXIMIZE EARLY PLANING & TOP SPEED
A straighter leading edge from the base increases early planing potential and the new square tip eliminates unneeded surface area that typically causes drag. Combined with a thinner profile in the bottom half to increase maneuverability, this Freewave fin is the ultimate choice for great performance across a variety of conditions.
MFC has worked with Goya & Quatro to redesign of the powerbox fin. They moved the fin forward on the base, where the testing team found it to be the best position. This new design means there is no compromise on fin placement, and the screw hole is now in an easier spot to access from the deck.
Fin bolts / screws are not included with windsurf fins as every board uses a different length depending on the depth / volume of the tail.
FIN BOLTS - we now stock A4 Stainless Torx Fin Screws in all sizes.
Select options
This product has multiple variants. The options may be chosen on the product page
Ding All Epoxy Repair Kit 2+1fl oz
Ding All's Standard Epoxy Resin Ding Repair Kit works for both Epoxy and Polyester Ding repairs when UV light is NOT present and fiberglass cloth is needed.
This kit contains Ultra Clear, SS 2000 resin that is used in Epoxy surfboard construction. The resin is dual purpose, and can also repair polyester surfboards. The kit comes complete with the following materials to allow an easy method for small or medium surfboard repairs.
Epoxy Working time is approx. 30 minutes. Full cure in 6 to 8 hours at 77 degrees F.
*NOTE: Use 1/4” Layers of Filled Epoxy resin to fill larger holes or voids to avoid resin overheating.
Kit Includes:
- x1 - 2 oz. (56 ml). Ultra Clear Epoxy Resin Plus 1 oz. (28ml). Hardener - Non-Yellowing
- x1 - 15cm x 34cm Fiberglass Cloth patch
- x1 - 2 Sided Sanding Pad (1 side Smooth (120 grit) ,1 side Rough- (80 grit) For easy sanding.
- x1 - Measuring Cup Note: cup can be re-used after popping out hardened resin from previous repair
- x3 - Application/Mixing Sticks
- x1 - Cover Sheet Note: this is used to cover small dings to make super smooth finish once hardened. Just peel off.
- Easy Instructions
Starboard Windsurf Boardbag
Quality padded board bags utilising up-cycled plastic bottles. Each model features comfortable shoulder straps and a fin slot.
Select options
This product has multiple variants. The options may be chosen on the product page
Severne NYCA Windsurfing Fin
NYCA FINS
NYCA is an injection-based technology utilising a specialised blend of thermoplastic polymer and carbon fibres. This blend not only offers resistance to abrasion but also the ideal rigidity for windsurfing performance.
Carbon fibre content is added to create efficient active flex patterns, similar to traditional premium production methods.
NYCA fins are lighter and more durable than traditional G10 or RTM fins, with much higher strength and impact resistance. As a result, longevity is also upgraded, whether be it for hours on the water or impacts with shallow reefs.
/ Moderate stiffness
/ Responsive
/ Increased control
/ Lightweight
The NYCA wave fin
NYCA technology wave fins are precision manufactured for responsiveness. This latest innovation not only enhances drive and control but does so without compromising acceleration and top speed. This is achieved by maintaining the tried and proven blueprint that current SEVERNE wave fins are built on. Front lateral fins Crafted for optimal acceleration and drive, the lower section of these fins prioritizes maximum speed. With a relatively pronounced rake, narrow chord, and forward profile, more lift is produced while drag is minimised. Fast and efficient. The curved yet compact tips ensure a predictable engagement and release effect. Rear lateral fins Equipped with a wider base, the rear lateral fins provide essential stability. A moderate rake and a relatively narrow chord in the top section generate substantial drive. An enhanced surfing experience.
Select options
This product has multiple variants. The options may be chosen on the product page
SEVERNE PRO RACE ADJUSTABLE HARNESS LINES
PRO RACE ADJ. HARNESS LINES
Engineered for competition. The Pro Race Adjustable delivers the stiffness and precision that racers demand, with effortless adjustment across a wide range. Perfect for foil racers who need reliable, quick adjustment on the fly.
The proven CL253 cleat provides secure, one-handed adjustment while maintaining minimal swing even at full extension. Built with SEVERNE signature standards and clear safety tube for visual rope wear monitoring.
Features:
- CL253 cleat for reliable one-handed adjustment
- 3M anti-slip pads lock boom position
- Low friction rope for smooth operation
- Clear PU tube for visual rope wear check
- Minimal swing design maintains position
Sizes: 28″-34″ / 34″-40″ / 38″-44″ / 42″-48″ / 46″-52″
Select options
This product has multiple variants. The options may be chosen on the product page
MFC Liquid Pro TUTTLE BOX – Black
LIQUID PRO – FREERIDE
New outline, new profile, new materials, the LIQUID PRO is the new freeride/freerace concept by MFC. The profile is generated by our racing R&D department, with incredible top speed, great planning and maneuverability. Ideal for Freeride/Freerace conditions, as well as flat and choppy conditions. This model is available in power, Tuttle and deep Tuttle base to supply all the board manufacturer demands.
Select options
This product has multiple variants. The options may be chosen on the product page
SEVERNE BOARD BAG LITE SHELL
Severne Windsurf Board Bag
- Suitable for a range of windsurf boards - please call 023 9258 2614 for further advice.
- 600D Black and Polysak White material – Optimized weight/ strength.
- 5MM Foam protection.
- Abrasion reinforcements at fin/foil cutout areas.
- Center rail handle and center deck handle.
- Max durability zipper.
- Overlap behind zipper to protect board from scratches.
- Size indication on the tail for easy identification.
- Internal stitchings for maximum protection.
- “T-Zipper” with velcro featured on foil bags for covering boards with foil assembled, as well as, max travel protection.
Select options
This product has multiple variants. The options may be chosen on the product page
Chinook 2 Bolt Tendon Base Euro Pin
Prolimit Wingfoil Perform Slider Board & Wings Bag – Blue
Heavy duty padded travel bag to travel around with your wingsurf gear.
New: Patented Slider wheels and slider base equipped. Easy to remove, easy to transport and maximum floor clearance.
Features:
- Internal straps x2
- Removable slider wheels
- Designed to fit
- Foil Board
- Foil
- Wings x3
- Pump
Select options
This product has multiple variants. The options may be chosen on the product page
Prolimit Wingfoil Session Board & Wings Bag – Blue
Select options
This product has multiple variants. The options may be chosen on the product page
Goya Fixed Skinny Harness Lines
Key Features
- Set of 2 fixed harness lines
- Designed for skinny Ø booms
- Anti-swing construction
- Pre-streched rope
- Heavy-duty tubing
- 6mm pre stretched rope
- 10mm Polyurethane Tube
Construction
65% Polyurethan 35% Nylon
Select options
This product has multiple variants. The options may be chosen on the product page