Fin Bolts
Surflogic Ratchet Fin Tool
Surflogic Ratchet Fin Tool: install and adjust your fins in seconds with this ergonomic tool. Includes 6 interchangeable bits for maximum versatility, perfect to always keep in your surf backpack.
Main features of the Surflogic Ratchet Fin Tool:
- Quick & easy fin installation
- 6 bits included
- 2 x fin head
- 2 x Phillips head #2 & #3
- 2 x flat head 5 & 6 mm
- Plastic free packaging
- Colour: black
M8 Locking Brass T Nut Set (x4 nuts)
Set of 4 Locking T-Nuts M8
Stop loosing your nuts with the Locking T-Nuts. Order a set of four and give your board the re-vamp it needs. These locking T-Nuts are for all foil boards.
How it works:
- Open your newly purchased pack of four locking T-Nuts.
- Place them in the tracks of your boards
- Mount the foil mast like you would normally, lining up the t-nuts with the bolts how you normally would.
- Carefully remove bolts and mast. Try not to nudge the t-nuts!
- Here is where the magic happens. Carefully do the grub screws up one by one.
- DO NOT OVER TIGHTEN! They only need to be done up enough to pinch the t-nut in place.
- Repeat on all T-nuts! You are all done, now you will not loose these pesky little nuts any more. And even better they will always be in the perfect place!!!
NAISH Board Mount Screw Set Standard (x4)
BOARD MOUNT SCREW SET – STANDARD PLATE (TORX)
Four (4) M6 30 mm Stainless Steel Torx Screws
Four (4) M6 Stainless Steel T-nuts
CLICK HERE to go to the Starboard / Naish Foil Mount Screws and T-Nut Sets.
20mm Rubber Washer (x1) For Windsurfing Fin bolts
FCS extra long 12mm grub screw
Starboard Foils – Stainless Steel Torx Bolt Set For Quick Lock Fuselage
Starboard (& Fits Naish) Foil to Board Top Plate Torx Bolts 30mm and M6 T Nuts
Please note these have come to us without the top card header on the packaging.
BOARD MOUNT M6 SCREW SET – STANDARD PLATE (TORX)
Four (x4) M6 30mm Stainless Steel Torx Screws
Four (x4) M6 Stainless Steel T-nuts
For Naish boards you probably need to buy 25mm screws
CLICK HERE for M6 counter sunk screws in different lengths
M6 Locking Brass T Nut Set (x4 nuts)
Set of 4 Locking T-Nuts M6
Stop loosing your nuts with the Locking T-Nuts. Order a set of four and give your board the re-vamp it needs. These locking T-Nuts are for all foil boards.
How it works:
- Open your newly purchased pack of four locking T-Nuts.
- Place them in the tracks of your boards
- Mount the foil mast like you would normally, lining up the t-nuts with the bolts how you normally would.
- Carefully remove bolts and mast. Try not to nudge the t-nuts!
- Here is where the magic happens. Carefully do the grub screws up one by one.
- DO NOT OVER TIGHTEN! They only need to be done up enough to pinch the t-nut in place.
- Repeat on all T-nuts! You are all done, now you will not loose these pesky little nuts any more. And even better they will always be in the perfect place!!!