Footstrap Screw M6 (6mm) x 27mm Pozi A4 Marine Grade Stainless

£1.50

In stock

High quality footstrap screws. Marine Grade A4 stainless. These are blunt end, PZ2 and measure 27mm under the head. An upgrade to the standard Cobra screws. Most windsurf boards use these and many directional kitesurfing boards do too.

M7 Starboard Stainless Windsurfing / Kitesurfing Foot strap screw 28mm & 32mm

£1.90

In stock

M7 Stainless Windsurfing Kitesurfing Footstrap screw 32 & 28mm  These are now standard footstrap screws for all Starboard windsurfing boards.  
Select options This product has multiple variants. The options may be chosen on the product page

SAB Hardware Kit – Allen Keys, Torx Keys and Lithium Grease

£23.95

Temporarily out of stock, please call - 023 9258 2614

  • Comes with 3 allen keys with torx and allen key head.
  • Tube of lithium grease.

SAB Hardware Kit – T-Nuts and bolts

£23.95

Temporarily out of stock, please call - 023 9258 2614

M8 T-nuts and 30mm M8 Countersunk bolts

  • This hardware set will fit most foils that use the M8 connection. Please call if unsure.

Starboard (& Fits Naish) Foil to Board Top Plate Torx Bolts 30mm and M6 T Nuts

£22.95

Temporarily out of stock, please call - 023 9258 2614

Please note these have come to us without the top card header on the packaging. BOARD MOUNT M6 SCREW SET – STANDARD PLATE (TORX) Four (x4) M6 30mm Stainless Steel Torx Screws Four (x4) M6 Stainless Steel T-nuts For Naish boards you probably need to buy 25mm screws CLICK HERE for M6 counter sunk screws in different lengths

Starboard Foils – Stainless Steel Torx Bolt Set For Quick Lock Fuselage

£6.99

Temporarily out of stock, please call - 023 9258 2614

The modular platform for wing & wave foils brings incredible versatility, with interchangeable wings, masts and fuselages allowing foilers of all levels to customise their setups for various wind and wave conditions.

M6 Locking Brass T Nut Set (x4 nuts)

£23.95

Temporarily out of stock, please call - 023 9258 2614

Set of 4 Locking T-Nuts M6

Stop loosing your nuts with the Locking T-Nuts. Order a set of four and give your board the re-vamp it needs. These locking T-Nuts are for all foil boards.   How it works:  - Open your newly purchased pack of four locking T-Nuts. - Place them in the tracks of your boards - Mount the foil mast like you would normally, lining up the t-nuts with the bolts how you normally would. - Carefully remove bolts and mast. Try not to nudge the t-nuts! - Here is where the magic happens. Carefully do the grub screws up one by one. - DO NOT OVER TIGHTEN! They only need to be done up enough to pinch the t-nut in place. - Repeat on all T-nuts! You are all done, now you will not loose these pesky little nuts any more. And even better they will always be in the perfect place!!!

M6 Stainless Allen Key Button Head Screw 30mm (Torx 25 also fits)

£1.00

Temporarily out of stock, please call - 023 9258 2614

These are stainless steel M6 (6mm thread) 4mm allen key button head screws. T25 Torx also fits

Naish Hover Footstrap Set of 3

£69.95

Temporarily out of stock, please call - 023 9258 2614

This set does not include screws and hardware

Starboard Foil Bag XXL V2 (*Fits All Starboard Front Wings)

£99.00

Temporarily out of stock, please call - 023 9258 2614

*Max internal dim: 105 x 40 x 15cm

AFS F700 Access 700mm/779 cm2 – Freeride Foil Front Wing

£359.00

Temporarily out of stock, please call - 023 9258 2614

***Please note this is just for the front wing not the whole hydrofoil setup*** The AFS-F700 access is the standard front wing supplied with the AFS-W85 foil package. This front wing is optimised to make Windfoiling fun and accessible to all levels of rider in moderate wind ranges. It provides more low speed lift than the F-700, but it still has a large envelope of performance combined with this accessibility, making it suitable for all levels of rider from Beginner to Experienced and is ideal for all the Freeride - Freerace applications the majority of recreational riders will want to participate in. It is best suited to use with the Stab v1, so is ideal for use as on the W85 and can be used as replacement for the original front wing on the W95 or the AFS-2 to provide a small gain in low speed lift, but a small loss in top speed as the trade-off. The ultra-strong, Monolithic Full Carbon Pre-Preg T700 construction is the result of more than 11 years of research/testing that have gone into developing this product, to ensure it delivers unrivalled performance for the Beginner - Experienced Freerider in an intended wind range of 9-25 knots.

Naish Hover Footstrap with Screws and Plates

£24.95

Temporarily out of stock, please call - 023 9258 2614