Foiling Accessories Bolts & Screws
Naish M6 Stainless 25mm & 20mm Torx Foil Assembly Screw Set
M8 Locking Brass T Nut Set (x4 nuts)
Set of 4 Locking T-Nuts M8
Stop loosing your nuts with the Locking T-Nuts. Order a set of four and give your board the re-vamp it needs. These locking T-Nuts are for all foil boards.
How it works:
- Open your newly purchased pack of four locking T-Nuts.
- Place them in the tracks of your boards
- Mount the foil mast like you would normally, lining up the t-nuts with the bolts how you normally would.
- Carefully remove bolts and mast. Try not to nudge the t-nuts!
- Here is where the magic happens. Carefully do the grub screws up one by one.
- DO NOT OVER TIGHTEN! They only need to be done up enough to pinch the t-nut in place.
- Repeat on all T-nuts! You are all done, now you will not loose these pesky little nuts any more. And even better they will always be in the perfect place!!!
M8 T40 Torx Button Head A4 Stainless Screw 25mm & 30mm
These are A4 stainless steel M8 (8mm thread) T40 torx button head screws. Perfect for screwing your foil plate to you board. PLEASE CHECK LENGTH REQUIRED.
Select options
This product has multiple variants. The options may be chosen on the product page
M8 Torx Head Counter Sunk Screw 20mm – 50mm
These are stainless steel M8 (8mm thread) counter sunk screws.
We do try to stock all M8 screws with the more widely used T40 Torx heads but it has proved difficult so unfortunately we have a mixture. You can use a T40 tool in T45 screw head but it is not ideal and will eventually round out the head. From the brands that we sell the main sizes are T30 and T40.
Screw sizes and Torx tool head size:
- 20mm = T45
- 25mm = T40
- 30mm = T40
- 35mm = T45
- 40mm = T40
- 50mm = T40
Select options
This product has multiple variants. The options may be chosen on the product page
M6 T30 Torx Head Counter Sunk Screw 10mm-40mm
These are stainless steel M6 (6mm thread) T30 torx head counter sunk screws.
Made from A4 Stainless Steal
Select options
This product has multiple variants. The options may be chosen on the product page
Footstrap Screw M6 (6mm) x 27mm Pozi A4 Marine Grade Stainless
M7 Starboard Stainless Windsurfing / Kitesurfing Foot strap screw 28mm & 32mm
M7 Stainless Windsurfing Kitesurfing Footstrap screw 32 & 28mm
These are now standard footstrap screws for all Starboard windsurfing boards.
Select options
This product has multiple variants. The options may be chosen on the product page
UJ T-Nut Brass 8mm For Standard Windsurfing & Wing Board Mast Tracks
UJ T-Nut For Windsurfing deckplate
If sold out please look at our M8 Stainless T-Nuts
SAB Hardware Kit – T-Nuts and bolts
Starboard (& Fits Naish) Foil to Board Top Plate Torx Bolts 30mm and M6 T Nuts
Please note these have come to us without the top card header on the packaging.
BOARD MOUNT M6 SCREW SET – STANDARD PLATE (TORX)
Four (x4) M6 30mm Stainless Steel Torx Screws
Four (x4) M6 Stainless Steel T-nuts
For Naish boards you probably need to buy 25mm screws
CLICK HERE for M6 counter sunk screws in different lengths
Starboard Foils – Stainless Steel Torx Bolt Set For Quick Lock Fuselage
M6 Locking Brass T Nut Set (x4 nuts)
Set of 4 Locking T-Nuts M6
Stop loosing your nuts with the Locking T-Nuts. Order a set of four and give your board the re-vamp it needs. These locking T-Nuts are for all foil boards.
How it works:
- Open your newly purchased pack of four locking T-Nuts.
- Place them in the tracks of your boards
- Mount the foil mast like you would normally, lining up the t-nuts with the bolts how you normally would.
- Carefully remove bolts and mast. Try not to nudge the t-nuts!
- Here is where the magic happens. Carefully do the grub screws up one by one.
- DO NOT OVER TIGHTEN! They only need to be done up enough to pinch the t-nut in place.
- Repeat on all T-nuts! You are all done, now you will not loose these pesky little nuts any more. And even better they will always be in the perfect place!!!
