Sabfoil Kraken Rail Top Plate Carbon CP02K with Lock Pin and Allen Tool
£240.00 Original price was: £240.00.£199.00Current price is: £199.00.
The CP02K Carbon Kraken Plate was born as an upgrade of its aluminum counterpart (P02K)
The weight of the plate has been lowered by over 200g (-30% compared to the aluminum version), thus reducing the overall weight of the mast by about 10% while maintaining all the mechanical properties and robustness of the system.
The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T04K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle.
The Kraken Plate also allows you to upgrade your set-up with the Quick Release System (Q01K), thanks to which you can assemble and disassemble your hydrofoil in seconds, without losing the configuration on the board.
Only 1 left in stock
The CP02K Carbon Kraken Plate was born as an upgrade of its aluminum counterpart (P02K)
The weight of the plate has been lowered by over 200g (-30% compared to the aluminum version), thus reducing the overall weight of the mast by about 10% while maintaining all the mechanical properties and robustness of the system.
The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T04K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle.
The Kraken Plate also allows you to upgrade your set-up with the Quick Release System (Q01K), thanks to which you can assemble and disassemble your hydrofoil in seconds, without losing the configuration on the board.
Q01KÂ (QUICK RELEASE SYSTEM) SOLD SEPARATELY
If you already use the Quick Release System with the aluminum plate (P02K), you will need to modify the setup in order to use it with the carbon plate (CP02K). Please follow the instructions you can find in the manual available for download on this page
| Brand | Sabfoil |
|---|---|
| Construction | Carbon |
Related products
Sabfoil Razor PRO | T6 Hydrofoil Front Wing
In stock
Sabfoil Balz MĂ¼ller Limited | T8 Hydrofoil Front Wing
In stock
Sabfoil Kraken Rail Top Plate Aluminium P02K
Only 1 left in stock
SAB Hardware Kit – Allen Keys, Torx Keys and Lithium Grease
Temporarily out of stock, please call - 023 9258 2614
SAB Foil F653K – FUSELAGE 653 T6/R8
Available at UK supplier - please call 023 9258 2614
- 653 mm aluminum fuselage, with T6 front wing connection type (small chord and M6 screws).
- The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant while maintaining performance.
- Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
Dimensions & Advanced specs
Sabfoil Flat Stablizers with Pro Finish
In stock
Sabfoil Medusa PRO Hydrofoils Front Wings
In stock
Medusa PRO 769
The Medusa PRO 769 front wing finds its best use in Wing, Wind, and Kite foiling in medium-high wind conditions, but also gives great satisfaction during surf foil sessions.SAB Medusa Front wing foil cover
In stock
SABFOIL COVER MAST – 83cm or 93cm
In stock
Sabfoil KIT VENTO MEDUSA 899 Windsurf Hydrofoil – Freeride / Freestyle
In stock

Reviews
There are no reviews yet.